Volume XIV (IV), 2005
- THE CROSS DISPLACEMENTS FIELD OF A LINEAR ELASTIC KINEMATIC ELEMENT WITH UNIFORMLY ROTATIVE MOTION, CONSTITUTIVE PART OF A LINKAGE
- Adina CATANEANU, Dan Georghe BAGNARU
- adinavc@mecanica.ucv.ro
- DOI: 10.15660/AUOFMTE.2005.1
- THE COMPARATIVE STUDY BETWEEN THE EXACT AND THE APPROXIMATE METHODS FOR DETERMINATION OF THE DISPLACEMENT FIELD IN CASE OF KINEMATICAL ELEMENTS BEING IN VIBRATION
- Adina CATANEANU, Dan Georghe BAGNARU
- adinavc@mecanica.ucv.ro
- DOI: 10.15660/AUOFMTE.2005.2
- ANALYSE OF MAKE-UP TORQUE OF SHOULDERED THREADED CONNECTIONS FOR LARGE DIAMETER DRILL STEM
- Adrian CREIŢARU, Niculae GRIGORE, Ion FLOREA
- adriancreitaru@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.3
- POSSIBILITIES TO REDUCE THE HEAD INJURIES OF PEDESTRIANS IN CASE OF TRAFFIC COLLISIONS WITH VEHICLES
- Adrian ŞOICA
- DOI: 10.15660/AUOFMTE.2005.4
- ANALYSIS OF TRAFFIC COLLISIONS BETWEEN VEHICLES AND PEDESTRIANS AIMING AT REDUCING THE INJURY POTENTIAL
- Adrian ŞOICA, Dana LUCA MOTOC
- DOI: 10.15660/AUOFMTE.2005.5
- ON THE HEAT BEHAVIOR OF THE MATERIALS MAKING UP OF A STEAM BOILER
- Amalia DASCĂL, Marius ARDELEAN
- amalia@fih.utt.ro
- DOI: 10.15660/AUOFMTE.2005.6
- CFD STUDY CONCERNING THE UNDERBODY COMPONENTS INFLUENCE ON TOTAL DRAG FOR A TERRAIN CAR
- Angel HUMINIC, Adrian ŞOICA
- angel.h@unitbv.ro, a.soica@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.7
- THE RESEARCH OF THE INFLUENCE OF PRECISION THICKNESS BLANK ABOUT SEVERAL PARAMETERS WHICH APPEAR IN DRAWING PROCESS WITH THINNING IMPOSE OF MATERIAL
- Aurelia CHIOIBAŞ
- DOI: 10.15660/AUOFMTE.2005.8
- FUEL INDUCTION TECHNIQUES FOR A HYDROGEN OPERATED ENGINE
- Bogdan Cornel BENEA
- c-am@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.9
- STUDY ON PURE SHEAR TESTS AND FATIGUE PROPERTIES OF HUMAN CORTICAL BONE
- Constantin BÃŽTCĂ*, Paul Doru BÂRSĂNESCU, Mihai MIHĂLCUŢ
- bitcos@yahoo.ie
- DOI: 10.15660/AUOFMTE.2005.10
- DIMENSIONS OPTIMIZATION OF SWIVEL’S BAIL OF DRILLING EQUIPMENT F – 8000 KN
- Constantin MANEA, Stefan MINOIU, Ion FLOREA
- DOI: 10.15660/AUOFMTE.2005.11
- DETERMINATION OF CARACTERISTIC FRACTURE MECHANICS VALUE AS RESISTANCE USING THE INSTRUMENTED IMPACT TEST
- Constantin STANESCU, Adriana CARSTOIU, Vasile SURCEL, Cristian BEBE
- prof_cstanescu@yahoo.com, adriana_cirstoiu@yahoo.com, cr_bebe@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.12
- STUDY ON THE INFLUENCE OF THE TRANSFER RATIO VALUES ON THE DYNAMIC PARAMETERS OF MECHANIC ECCENTRIC PRESSES
- Corneliu BURLACU, Dan MIRCEA
- lushisro@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.13
- RESEARCH ON THE INFLUENCE OF THE CONNECTING ROD MASS AND THE SLIDER MASS ON THE DYNAMIC BEHAVIOR OF MECHANIC ECCENTRIC PRESSES
- Corneliu BURLACU, Dan MIRCEA
- DOI: 10.15660/AUOFMTE.2005.14
- CONSIDERATIONS CONCERNING THE DYNAMICS OF VIBRATORY MILLS USED IN POWDERS’ MECHANICAL MILLING PROCESS
- Cristian Pavel, Amelitta Legendi
- DOI: 10.15660/AUOFMTE.2005.15
- THE INFLUENCE OF THE VIBRATIONS UPON THE STRESS AND DEFORMATION STATES IN CASE OF THE LINEAR-ELASTIC CONNECTING ROD FOR A SLIDER CRANK MECHANISM R(RRT)
- Dan Gheorghe BAGNARU
- bagnaru@mecanica.ucv.ro
- DOI: 10.15660/AUOFMTE.2005.16
- THE INFLUENCE OF THE KINEMATICAL PARAMETERS CONCERNING THE VIBRATIONS OF THE VISCOELASTIC CONNECTING ROD FOR A SLIDER-CRANK MECHANISM
- Dan Gheorghe BÃGNARU, Adina CÃTÃNEANU
- bagnaru@mecanica.ucv.ro
- DOI: 10.15660/AUOFMTE.2005.17
- INFLUENCE OF ENERGETICS AND ECOLOGICS PARAMETERS IN INTERNAL COMBUSTION ENGINES USING HYDROGEN AS AN ALTERNATIVE FUEL
- Daniel MATEI
- DOI: 10.15660/AUOFMTE.2005.18
- A NEW ROBUST CLUSTERING TECHNIQUE DEDICATED TO OPTIMAL DESIGN SOFTWARE
- Daniela JUCAN, Lucian TUDOSE
- DOI: 10.15660/AUOFMTE.2005.19
- THE VEHICLE REAR END COLLISION
- Daniel-Dragoş TRUŞCA, Adrian ŞOICA
- DOI: 10.15660/AUOFMTE.2005.20
- PSEUDOSPECTRA – APPLICATIONS TO ROBUST STABILITY AND CONTROL OF DYNAMICAL SYSTEMS
- Dumitru NICOARA
- tnicoara@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.21
- THE INFLUENCE OF VIBRATIONS AGAINST BUILDINGS
- Eugenia SECARĂ
- DOI: 10.15660/AUOFMTE.2005.22
- THE INFLUENCE OF LOW FREQUENCY VIBRATIONS AGAINST DRIVERS
- Florin CONSTANTIN, Eugenia SECARĂ
- DOI: 10.15660/AUOFMTE.2005.23
- A PURIFICATION THEOREM FOR EXTENDED FORM PERFECT INFORMATION GAMES
- Gabriela Cristescu
- DOI: 10.15660/AUOFMTE.2005.24
- PROTECTION METHODS AIMED AT LOWERING HEAD TO BONNET IMPACT INJURY LEVEL
- George TOGANEL, Adrian SOICA
- DOI: 10.15660/AUOFMTE.2005.25
- CONSTRUCTION HAMMER MILL FOR GRINDING PEPPERS
- Gheorghe ABRUDAN, Ion Bratu Ion, Tudor MITRAN
- DOI: 10.15660/AUOFMTE.2005.26
- THE MACHINERY THAT DRAWS OUT THE STALKS FROM CHEERIES AND SOUR CHEERIES
- Gheorghe ABRUDAN, Ion BRATU, Tudor MITRAN
- DOI: 10.15660/AUOFMTE.2005.27
- MECHANISM CLOSED BY INERTIA
- Gheorghe DELIU, Sorin VLASE
- DOI: 10.15660/AUOFMTE.2005.28
- HUMAN MULTIBODY MODEL FOR THE KINEMATICS IDENTIFICATION OF THE HURDLES RACE USING EULER ROTATION
- Ioan BURCA, Mihai TOFAN, Sorin VLASE, Arina MODREA
- DOI: 10.15660/AUOFMTE.2005.29
- THE INFLUENCE STUDY OF THE ELASTIC AND SAFETY CLUTCH COMPONENT ELEMENTS ABOUT THE TORQUE MOMENT AND ABOUT THE ELASTIC SPECIFIC FEATURE
- Ioan STROE
- stroei@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.30
- ANOTHER APPROACH TO THE CALCULUS OF THE FLYWHEEL MOMENT OF INERTIA
- Ion FLOREA, Niculae GRIGORE, Stefan MINOIU
- i_f_00@Yahoo.com
- DOI: 10.15660/AUOFMTE.2005.31
- RESEARCHES WITH REGARDING TO THE ANALITICAL CALCULUS OF THE FLYWHEEL MOMENT OF INERTIA
- Ion FLOREA, Niculae GRIGORE, Adrian CREITARU
- i_f_00@Yahoo.com
- DOI: 10.15660/AUOFMTE.2005.32
- FRF MEASUREMENT FOR EXPERIMENTAL MODAL ANALYSIS USING LABVIEW
- Iulian LUPEA
- i_lupea@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.33
- MODELING OF WORK OF SHOCK DAMPER WITH MAGNETORHEOLOGICAL FLUID
- Liviu BRINDEU, L. BERETEU, Ramona NAGY, Al. BOLTOŞI
- DOI: 10.15660/AUOFMTE.2005.34
- NUMERICAL METHOD FOR AUTOMOBILE SPEED DETERMINATION
- Liviu GEORGESCU1 George DRAGOMIR2 Mihail COCOŞILĂ3 Serban RADU1
- liviugeorgescuro@yahoo.com, SerbanRadu@cspub.ro, georgedragomir@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.35
- NUMERICAL CALCULUS FOR FUEL CONSUMPTION AND SOURCES OF ERRORS
- Liviu GEORGESCU1, George DRAGOMIR2, Mihai COCOŞILĂ3
- liviugeorgescuro@yahoo.com, georgedragomir@yahoo.com, cocos40@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.36
- LE FACTEUR DE CHUTE EN ESCALADE
- Mariana-Felicia MORAR
- mmorar@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.37
- EXTERNAL MECHANICAL FACE SEALS WITH IMPULSES. STATIC STABILITY ANALISYS
- Marius PUSTAN
- DOI: 10.15660/AUOFMTE.2005.38
- COMPUTER ANALYSIS OF EXTERNAL MECHANICAL FACE SEAL WITH IMPULSES BASED ON FLUID LOSSES
- Marius PUSTAN
- DOI: 10.15660/AUOFMTE.2005.39
- THE FATIGUE CRACK PATH OF A STEEL UNDER NON- PROPORTIONAL LOADING PATHS
- Mihai MihǎlcuÈ›, Paul-Doru BÂRSĂNESCU, Constantin BITCĂ
- mihaimihalcut@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.41
- THE BEHAVIOR OF SOME STEELS AT FATIGUE UNDER MULTIAXIAL STRESSES
- Mihai Mihalcut, Paul-Doru Bârsanescu, Constantin Bîtca
- mihaimihalcut@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.42
- ASPECTS REGARDING CALCULATION SYSTEM OF PIPES FOR SIMULTANEOUS ACTION OF OLIGOCYCLIC FATIGUE AND CREEPING
- Niculae GRIGORE Ion FLOREA Adrian CREIŢARU
- DOI: 10.15660/AUOFMTE.2005.43
- OPTIMISATION CINÉMATIQUE-DYNAMIQUE DU SUSPENSION A QUADRILATER DEFORMABLE CONCERNANT DE MOUVEMEND DE ROULIS
- Petre ALEXANDRU, Gabriel ANDREICA
- DOI: 10.15660/AUOFMTE.2005.44
- DOMAINS OF INCLUDING OF VIBROIMPACT PERIODIC REGIMES IN RELATION TO THE POSSIBLE MOTIONS
- Ramona NAGY, L. BRÃŽNDEU
- DOI: 10.15660/AUOFMTE.2005.45
- INTEGRATE MANAGEMENT OF NOISE – ACOUSTIC MAPS
- Sorin ANGHEL1), Amalia POPESCU2), Carmen IONESCU GOLOVANOV3), Mircea BĂRBUCEANU1)
- DOI: 10.15660/AUOFMTE.2005.46
- CALCULE DE MATRICE DE RIGIDITE POUR LES ROULEMENTS RADIALES
- Sorin PATER, Tudor MITRAN, Andrei COCAINA
- DOI: 10.15660/AUOFMTE.2005.47
- MODELATION DES TRANSMISION DES BOITES DE VITESE
- Sorin PATER, Tudor MITRAN, Ion BRATU
- DOI: 10.15660/AUOFMTE.2005.48
- RESISTANCE SPOT WELDING OF METALLIC COMPOSITE MATERIALS WITH STAINLESS STEEL FIBRES REINFORCED ALUMINIUM ALLOY MATRIX
- Stelian NEGOIŢESCU, Eduard BERGER, Remus BELU
- eberger@mec.utt.ro, rbelu@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.49
- TRAFFIC NOISE POLLUTION IN THE CITY AND SOME NOISE REDUCING MEASURES
- Stelian ŢÂRULESCU
- DOI: 10.15660/AUOFMTE.2005.50
- EFFECT OF VORTEX ABOUT SUBMARINE PIPELINES
- Timur CHIS
- tchis@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.51
- A MATHEMATICAL MODEL TO CALCULATE GAS EXCHANGE PROCESS IN INTERNAL COMBUSTION ENGINES
- Tudor MITRAN, Sorin PATER, Gheorghe ABRUDAN
- DOI: 10.15660/AUOFMTE.2005.52
- A MATHEMATICAL MODEL TO CALCULATE THE COMPRESSION, BURNING AND PROCESSES IN DIESEL ENGINES
- Tudor MITRAN, Sorin PATER, Gheorghe ABRUDAN
- DOI: 10.15660/AUOFMTE.2005.53
- THE INFLUENCE OF "GYROSCOPIC†EFFECT TO CENTRIFUGAL MOULDING MACHINES
- Vasile JIMAN, Virgil GEAMĂN
- DOI: 10.15660/AUOFMTE.2005.54
- STUDY OF THE STABILITY OF PERIODIC RESPONSES FOR THE DUFFING OSCILLATOR
- Vasile MARINCA, Nicolae HERISANU
- vmarinca@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.55
- PERIODIC SOLUTION WITH AN APPROXIMATE METHOD FOR NONLINEAR OSCILLATIONS
- Vasile MARINCA, Nicolae HERISANU
- vmarinca@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.56
- CONTRIBUTIONS TO THE ENERGETIC STUDY OF THE CIRCULATING SYSTEM: ABOUT THE INCREDIBLE EFFICIENCY OF THE HUMAN ORGANISM
- Victor BENCHE, Virgil-Barbu UNGUREANU
- virbung@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.57
- DEVELOPMENT OF PREALLOYED ALUMINUM POWDERS FOR HIGH PERFORMANCES IN AUTOMOTIVE APPLICATIONS
- Virgil GEAMĂN, Iulian Ioan ZAHARIA, Vasile JIMAN
- DOI: 10.15660/AUOFMTE.2005.58
- DRIVING SYSTEM FOR A SIMULATION PLATFORM USED FOR A TRANSPORT VEHICLE
- Cornel CIUPAN, Virgil ISPAS, Mihai DAMIAN, Emilia CIUPAN, Cosmin MARCU
- DOI: 10.15660/AUOFMTE.2005.59
- ACCONT COEFFICIENTS WITH HOMOGENIZATION METHOD FOR COMPOSITE MATERIALS WITH SHORT FIBERS
- Teodor,POTRA*, Horatiu,IANCAU**, Alina,CRAI***
- potrat@math.utcluj.ro, Iancau.Horatiu@tcm.utcluj.ro, alinacrai77@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.60
- MODELL OF MECHANICAL SYSTEM OF A PENDULAR SIEVE WITH ONE NONEQUILIBRATED MASS GENERATOR
- Mircea Bogdan, TĂTARU, Alexandru RUS
- btataru@uoradea.ro, alrus@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.61
- L`ETUDE THEORIQUE DU PROCESSUS D’ECOULEMENT D’UN FLUIDE NON-NEWTONIEN DANS LA ZONE D`ALIMENTATION DES PALIERS HYDROSTATIQUES
- Alexandru Valentin RADULESCU
- sandu@meca.omtr.pub.ro
- DOI: 10.15660/AUOFMTE.2005.62
- CALIBRATION OF MICROPHONES USING THE RECIPROCITY TECHNIQUE
- Amalia POPESCU1), Carmen IONESCU GOLOVANOV 2), asist. univ. dr. Mircea Bărbuceanu3)
- DOI: 10.15660/AUOFMTE.2005.63
- EXTENSION OF RANGE FREQUENCY IN CALIBRATION OF CONDENSER MICROPHONES BY THE SIMPLIFIED RECIPROCITY METHOD
- Amalia POPESCU1), Carmen IONESCU GOLOVANOV2), Mircea BĂRBUCEANU3)
- DOI: 10.15660/AUOFMTE.2005.64
- COMPUTER MODELLING USED IN BIOMECHANICAL SYSTEMS
- Ciprian RADU* PhD. Student
- ciprian_radu@hotmail.com
- DOI: 10.15660/AUOFMTE.2005.65
- ANKLE JOINT REACTION FORCES IN DYNAMIC CONDITIONS
- Ciprian RADU*
- ciprian_radu@hotmail.com
- DOI: 10.15660/AUOFMTE.2005.66
- DEVICE FOR UPPER LIMB KINETHOTERAPY
- Dan MÂNDRU, Călin RUSU, Olimpiu TĂTAR
- mandrud@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.67
- DIE 3 D FORMUNG IN DER ENDPHASE DES VAKUUMPROZESSES MULTILIFT H
- Dănuţ PAVEL TOCUŢ , Aron TRIPE VIDICAN, Călin TRIPE VIDICAN
- DOI: 10.15660/AUOFMTE.2005.68
- DIE VOLLAUTOMATISIERUNG IN DER HERSTELLUNG DER SPRITZGUSSGERÄTE FÜR KUNSTSTOFF.
- Dănuţ Pavel TOCUŢ, Ioan MIHĂILĂ , Aron TRIPE VIDICAN
- DOI: 10.15660/AUOFMTE.2005.69
- PROJECT MANAGEMENT FOR THE VISUALISATION DATA BASE OF THE LUBRICATING GREASES
- Irina RADULESCU
- irina@ictcm.ro
- DOI: 10.15660/AUOFMTE.2005.70
- THE NEED TO USE LEGO KITS IN TEACHING ROBOTICS
- Lavinia Sabaila
- DOI: 10.15660/AUOFMTE.2005.71
- SYNTHESIS OF PETRI NETS USING LATCHES CIRCUITS
- Mihai TIMIŞ
- mtimis@cs.tuiasi.ro
- DOI: 10.15660/AUOFMTE.2005.72
- APPLICATION OF INVERSE MECHANICS TO THE BIOMECHANICAL ANALYSIS OF STANDING FALL
- Mircea BĂRBUCEANU1 Ion IORGA-SIMĂN1 Daniela BĂRBUCEANU1 Amalia POPESCU2)
- DOI: 10.15660/AUOFMTE.2005.73
- DETERMINATION OF FORCES RESPONSABLE FOR THE MOTION OF BIOMECHANISM USING THE INVERSE MECHANIC METHOD
- Mircea BĂRBUCEANU1), Sorin ANGHEl1), Daniela BĂRBUCEANU1), Amalia POPESCU2)
- DOI: 10.15660/AUOFMTE.2005.74
- MODELLING OF THE WHEELED MINI AND MICROROBOTS
- Olimpiu TĂTAR, Dan MÂNDRU, Rareş CRIŞAN
- olimpiut@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.75
- NANOTECHNOLOGIES - PRESENT AND FUTURE
- Pavel MUDURA, Tiberiu VESSELENYI
- DOI: 10.15660/AUOFMTE.2005.76
- THEORETICAL ASPECTS REGARDING THE MANIPULATED OBJECT SITUATION RELATED BY THE VISUAL SENSOR COORDINATE SYSTEM
- Radu ŢARCĂ, Florin BLAGA, Ioan TARCA
- DOI: 10.15660/AUOFMTE.2005.77
- THEORETICAL ASPECTS REGARDING THE INTERNAL FABRICATION OF GYPS-CONCRETE ELEMENTS
- Radu ŢARCĂ, Petru UNGUR, Dinu FODOR
- DOI: 10.15660/AUOFMTE.2005.78
- USING OF SONAR AND UTRASONIC SENSORS FOR MOBILE ROBOTS ORIENTATION
- Radu ŢÂRULESCU
- DOI: 10.15660/AUOFMTE.2005.79
- UPON PRESSURE MICROSENSORS DESIGN, MODELING AND SIMULATION
- Simona LACHE
- slache@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.80
- MODELING OF HUMAN DYNAMICS
- Daniela Mariana BARBU, Ion BARBU
- dbarbu@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.81
- ASPECTE ALE BIOMECANICII OCULARE
- Daniela Mariana BARBU, Ion BARBU
- dbarbu@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.82
- STUDY ABOUT PROCESS MONITORING ACHIEVED BY ELECTRICAL EROSION
- Alin MNERIE,.Aurel NANU, Titus SLAVICI, Dumitru MNERIE
- alin_mnerie@yahoo.com, dmnerie@mec.utt.ro, titus.slavici@k.ro
- DOI: 10.15660/AUOFMTE.2005.83
- STATE OF EQUILIBRIUM AND TECHNOLOGICAL PRINSIPES CONTROL OF DISCRETE MANUFACTURING SYSTEM
- Angel PAVLOV – Marian TOLNAY
- DOI: 10.15660/AUOFMTE.2005.84
- LE MODELAGE PARAMÉTRIQUE DES MÉCANISMES DE GUIDAGE D`AXE PAR L`UTILISATION DU PROGRAMME ADAMS
- Cătălin ALEXANDRU
- calex@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.85
- LA CAPACITÉ DE TAILLE DES PETITES PLAQUES RONDES DE C.M.S. UTILISÉES DANS LE TRAVAIL AU TOUR DES ÉLÉMENTS DU MATÉRIEL ROULANT
- Croitoru MARIAN
- DOI: 10.15660/AUOFMTE.2005.86
- INSTALLATION FOR THE „IN SITU†RECONDITIONING OF TRAM RAILS - CONSTRUCTIVE VERSION (Part 1)
- Damian RĂDESCU**, Felician ARDELEAN**, Mihaela POPESCU*, Puiu CÂNEPARU*, Aurelian MAGDA*, Adrian SAV
- mpopescu@mec.utt.ro, amagda@mec.utt.ro, dradescu@zappmobile.ro, asav@ctp.ro
- DOI: 10.15660/AUOFMTE.2005.87
- ONE CENTURY OF PLASTICS MATERIALS.
- Dan CHIRA, Ştefan MIHAILA
- dan.chira@rdslink.ro
- DOI: 10.15660/AUOFMTE.2005.88
- THE INFLUENCE OF COOLING TIME OVER SHRINKAGE AND WARPAGE OF INJECTION MOULD PIECE.
- Dan CHIRA, Alexandru RUS
- dan.chira@rdslink.ro
- DOI: 10.15660/AUOFMTE.2005.89
- THE WEARIN EVOLUTION OF THE TOOLS USED TO CUT RUBBER WASTE ACCORDING TO THEIR HARDNESS AND THE CHEMICAL COMPOSITION
- Dan DOBROTĂ, Ionel Gabriel CHIRCULESCU
- DOI: 10.15660/AUOFMTE.2005.90
- THE MATERIALS USED IN MAKING THE TOOLS FOR CUTTING RUBBER WASTE
- Dan DOBROTĂ, Ionel Gabriel CHIRCULESCU
- DOI: 10.15660/AUOFMTE.2005.91
- THE MODELING AND SIMULATION OF GRINDING PROCESSES
- Daniel POPESCU
- DOI: 10.15660/AUOFMTE.2005.92
- THE INFLUENCE OF THE MEASURING DEVICE ON THE MILLING PROCESS STABILITY
- Daniel POPESCU
- DOI: 10.15660/AUOFMTE.2005.93
- PROBLÈMES POSÉS PAR LE COMPORTEMENT À LA CORROSION DES MATÉRIAUX COMPOSITES MÉTALLIQUES (MCM) AYANT LA MATRICE EN ALLIAGES D’ALUMINIUM
- Doina DRAGULESCU, Camelia DEMIAN, Remus BELU, Eduard BERGER
- ddragulescu@mec.utt.ro, cdemian@mec.utt.ro, eberger@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.94
- NON-CONVENTIONAL NANO-TECHNOLOGIES
- Dumitru MNERIE
- dmnerie@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.95
- SOME ASPECTS OF MANUFACTURING USING JET JSG 96 MACHINE
- Dumitru NEDELCU Daniel MÃŽNDRU
- dnedelcu@tcm.tuiasi.ro
- DOI: 10.15660/AUOFMTE.2005.96
- THE SCHEDULING OF SINGLE-PART PRODUCTION. THE CRITICAL PATH
- Florin BLAGA, Radu Catalin TARCA
- fblaga@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.97
- TECHNOLOGY OF SINTERING, HEAT-TREATMENT PROCESS; ALLOY FORMATION IN A HETEROGENEOUS SYSTEM UNDER THE ACTION OF AN ELECTRIC CURRENT.
- Florin CIOFU Alin NIOAŢĂ
- cristianciofu@rdslink.ro, nalin@utgjiu.ro
- DOI: 10.15660/AUOFMTE.2005.98
- MECHANICAL ENGINEERING ASPECTS FOR FOOD’S LYOPHILIZATION TECHNOLOGY
- Gabriela ANGHEL, Dumitru MNERIE, Dumitru TUCU
- gabriela.A@k.ro, dmnerie@mec.utt.ro, dtucu@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.99
- NEW MODULAR SYSTEM OF ROTARY TABLES AS CNC AXES EXTENSION ON MACHINE TOOLS
- Ganea MACEDON1, Binselan MIHAI2
- DOI: 10.15660/AUOFMTE.2005.100
- MODERN SOLUTION ABOUT THE USING OF THE BEARINGS IN A HEAVY REGIME
- Ganea MACEDON1, Binselan MIHAI2
- DOI: 10.15660/AUOFMTE.2005.101
- MILLING HEAD WITH ANGULAR ORIENTATION ADAPTABLE ON MILLING AND BORING AND MILLING MACHINES
- George CONSTANTIN, Adrian GHIONEA
- george@imst.msp.pub.ro, ghionea@imst.msp.pub.ro
- DOI: 10.15660/AUOFMTE.2005.102
- LE DÉVELOPPEMENT DU SYSTÉME DE RÉTABLISSEMENT „IN SITU†DES RAILS AU CHEMIN DE TRANSPORT FERROVIAIRE URBAINE DE SURFACE IMPOSÉ PAR LE CONFORT ET LA SÛRETÉ DES VOYAGEURS
- Georgeta Emilia MOCUŢA*, Livius MILOŞ, Gheorghe GLIŢĂ, Damian RĂDESCU**, Felician ARDELEAN**, Adrian SAV***
- mocuta-ge@xnet.ro, lmilos@mec.utt.ro, gglita@mec.utt.ro, dradescu@zappmobile.ro
- DOI: 10.15660/AUOFMTE.2005.103
- ANALYSE COMPARATIVE DES PROCÉDÉS DE SOUDAGE/RÉTABLISSEMENT DES RAILS
- Georgeta Emilia MOCUŢA*, Mihaela POPESCU*, Damian RĂDESCU**, Felician ARDELEAN**
- mocuta-ge@xnet.ro, mpopescu@mec.utt.ro, dradescu@zappmobile.ro
- DOI: 10.15660/AUOFMTE.2005.104
- ULTRASONIC WELDING. VIBRATION MODES AND WORKING PARAMETERS OPTIMISATION
- Gheorghe AMZA Dan Florin NITOI Catalin AMZA
- amza@amza.camis.pub.ro
- DOI: 10.15660/AUOFMTE.2005.105
- THEORETICAL RESEARCH CONCERNING INTELLIGENT COMPOSITE MATERIALS PROCESSING
- Gheorghe Amza, Carp Victor
- DOI: 10.15660/AUOFMTE.2005.106
- EXPERIMENTALS RESEARCHS REGARDING THE INFLUENCE OF SOME TEHNOLOGICALS PARAMETRES OF THREADING OPERATION THROUGH PLASTIC DEFORMATION ABOUT THE QUALITY OF THREAD
- Gheorghe FLINTĂ, Maria PANTELIMON
- DOI: 10.15660/AUOFMTE.2005.107
- TECHNOLOGICAL SYSTEM FOR RECONDITIONING BY WELDING OF ROLLING STOCK COMPONENTS
- Gheorghe GLIŢA*, A.MAGDA*, M. BURCĂ, S. GLIŢĂ*, D: RĂDESCU**
- DOI: 10.15660/AUOFMTE.2005.108
- STUDIES ON THE OPTIMISATION OF THE SPIGOT-PIPE SUBASSEMBLY WELDING TECHNOLOGY FOR THE AUTOMOBILE DAMPERS
- Gheorghe GLIŢA*; M. BURCĂ*; I. LUCACIU**, A. MAGDA
- DOI: 10.15660/AUOFMTE.2005.109
- CASE STUDY ON DISCUS-SHAPED PARTS DEFORMATION - CENTRAL INJECTED PARTS, BY THERMOPLASTIC MATERIALS -
- Horia, UNGUR; Sorin, ILIE; Ioan, MIHAILA
- DOI: 10.15660/AUOFMTE.2005.110
- FIXTURE DESIGN WITH SENSORS
- Ioan Mihaila, Ionel Dejeu
- DOI: 10.15660/AUOFMTE.2005.111
- THE PROCESS OF RELIEVING TOOTHING KNIVES
- Ioan PANTEA1, Anamaria MADURA1, Valentin RADA2
- ipantea@uoradea.ro, amadura@uoradea.ro, valentin.rada@emsil.rdsor.ro
- DOI: 10.15660/AUOFMTE.2005.112
- THE PRECISION OF TOOTHING KNIVES
- Ioan PANTEA1, Nicolae CRECAN1, Valentin RADA2
- ipantea@uoradea.ro, ncrecan@yahoo.com, valentin.rada@emsil.rdsor.ro
- DOI: 10.15660/AUOFMTE.2005.113
- FLUX CORED ARC WELDING FABRICATION AND ENVIRONMENT
- Ionuţ ROBESCU
- robyd@email.ro
- DOI: 10.15660/AUOFMTE.2005.115
- CONSIDERATIONS REGARDIND THE CAMBER OF CYCLOIDAL CURVED CYLINDRICAL GEAR
- Iulian STĂNĂŞEL1, Ioan CHERMAN2, Ioan MIHÃILÃ1, Ioan PANTEA1
- DOI: 10.15660/AUOFMTE.2005.116
- NDT OF BUTT FUSION WELDED PEHD PIPES
- Laurenţiu MUŞAT*, Daniel ŢUNEA**, Teodor CĂRBUNARU*, Dan MĂLAI**
- dtunea@mec.utt.ro, dmalai@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.117
- STUDY ON RESIDUAL STRESS AND FRACTURE CHARACTERISTIC OF WELDED HIGH-DENSITY POLYETHYLENE PIPE
- Laurenţiu MUŞAT*, Teodor CĂRBUNARU*, Veronica ARGEŞANU**, Daniel ŢUNEA**
- vargrsanu@mec.utt.ro, dtunea@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.118
- UNELE ASPECTE PRIVIND DINAMICA MAŞINILOR PENTRU MĂRUNŢIREA LEMNULUI
- Liana Marta LUSTUN, Ioan MIHĂILĂ
- DOI: 10.15660/AUOFMTE.2005.119
- UNELE ASPECTE PRIVIND DINAMICA MAŞINILOR PENTRU DERULAREA FURNIRELOR
- Liana Marta LUSTUN, Ioan MIHĂILĂ
- DOI: 10.15660/AUOFMTE.2005.120
- EVOLUTION OF MAGNETRON-SPUTTERED TIB2
- Luboslava HRUBA1., Štefan VALÈUHA1, Branislav GRANÈIÈ2., Marián MIKULA3.,. Peter KÚŠ2.
- luboslava.hruba@stuba.sk
- DOI: 10.15660/AUOFMTE.2005.121
- OPTIMAL DESIGN OF PNEUMATIC EJECTORS DESTINED TO THIN WALL INJECTED PARTS WITH LINEAR PROFILE
- Lucian TUDOSE , Simion HARAGÃ‚Ş , Dumitru POP
- DOI: 10.15660/AUOFMTE.2005.122
- TCA FOR HYPOID AND SPIRAL BEVEL GEARS
- Madura ANAMARIA, Ioan MIHĂILĂ, Ioan PANTEA, Nicolae CRECAN
- DOI: 10.15660/AUOFMTE.2005.123
- NEW DISCOVERIES IN WN GEAR GEOMETRY
- Madura ANAMARIA, Ioan MIHĂILĂ, Ioan PANTEA, Nicolae CRECAN
- DOI: 10.15660/AUOFMTE.2005.124
- THE ELEMENTS ADJUSTMENT OF CINEMATICS AND TEHNOLOGICAL MACHINERY FOR DRESSINGS OF THE DISTORTS WITH CONTINOUS PASS
- Maria Luminiţa SCUTARU
- lscutaru@unitbv.ro
- DOI: 10.15660/AUOFMTE.2005.125
- ÃŽNCERCĂRI EXPERIMENTALE DE CĂLIRE SUPERFICIALĂ PRIN CURENŢI DE ÃŽNALTĂ FRECVENŢĂ LA FONTELE CENUŞII SR EN 1561 : 1999
- Maria MADA, Ioan MIHĂILĂ
- DOI: 10.15660/AUOFMTE.2005.126
- DURIFICAREA OŢELURILOR DE AMBUTISARE PRIN PRECIPITARE
- Maria MADA, Ioan MIHĂILĂ
- DOI: 10.15660/AUOFMTE.2005.127
- STUDIES REGARDING THE BASE STRUCTURE BEHAVIOUR OF THE POWERED-HANG-GLIDERS
- Marian TOPOLOGEANU1 Constantin DOGARIU Stefan VELICU Marius STOIA-DJESKA Mihaela CONSTANTINESCU
- DOI: 10.15660/AUOFMTE.2005.129
- STUDY ABOUT BETTER EQUIPMENT PERFORMANCE FROM SECTION MIL COOLING BED
- Marius ARDELEAN, Erika ARDELEAN Amalia DASCĂL
- marius_a@fih.utt.ro
- DOI: 10.15660/AUOFMTE.2005.130
- THE USE OF INSPECTION PLANNING FOR THE RELIABILITY ASSURANCE OF THE ACTIVE ELEMENTS OF THE STAMPS AND DIES
- Marius BÃBAN, Cãlin Florin BÃBAN, Alin POP, Alexandru Viorel PELE, Ioan Eugen RADU
- DOI: 10.15660/AUOFMTE.2005.131
- INSTALLATION FOR THE †IN SITU†RECONDITIONING OF TRAM RAILS - CONSTRUCTIVE VERSION (Part 1)
- Mihaela POPESCU*, Damian RĂDESCU**, Livius MILOŞ*, Gheorghe GLIŢĂ*, Puiu CÂNEPARU*, Felician ARDELEAN**, Aurelian MAGDA*, Adrian SAV***
- mpopescu@mec.utt.ro, lmilos@mec.utt.ro, gglita@mec.utt.ro, amagda@mec.utt.ro, dradescu@zappmobile.ro, asav@ctp.ro
- DOI: 10.15660/AUOFMTE.2005.132
- INFLUENCE OF SHAFT HEIGHT ON TECHNICAL CHARACTERISTICS OF UNIVERSAL HELICAL GEAR UNITS
- Milan RACKOV, Ruzica TRBOJEVIC, Sinisa KUZMANOVIC
- kuzman@uns.ns.ac.yu
- DOI: 10.15660/AUOFMTE.2005.133
- OPTIMIMIZAREA GEOMETRICĂ A MECANISMULUI DE SCOATERE A JOCULUI, MODEL PFAUTER UTILIZAT ÃŽN CONSTRUCŢIA MUCN CU AJUTORUL LANŢURILOR DE DIMENSIUNI
- Mircea GORDAN, Petru UNGUR, Mircea FODOR, Dan CRĂCIUN, Carmen Violeta IANCU, Nicolae CRECAN
- DOI: 10.15660/AUOFMTE.2005.134
- WELDING OF PLASTIC MASS BY MEANS OF INFRARED HEATING
- Mircea-Petru URSU, Traian BUIDOŞ
- (mpursu@uoradea.ro, tbuidos@uoradea.ro)
- DOI: 10.15660/AUOFMTE.2005.135
- RESEARCH AND EXPERIMENTS THE INFLUENCE OF CASTING PARAMETERS UPON THE SURFACE TEMPERATURE OF THE CONTINOUS CASTE-SEMI-PRODUCT
- Monika Erika POPA, Imre KISS, Adrian DANCIU
- erika_p@fih.utt.ro
- DOI: 10.15660/AUOFMTE.2005.136
- HOW GEARS WORK
- Nicolae CRECAN, Ioan MIHĂILĂ, Ioan PANTEA, Anamaria MADURA
- DOI: 10.15660/AUOFMTE.2005.137
- O APLICAŢIE A EFECTULUI DE PANĂ DE VISCOZITATE TERMICĂ LA COMPACTAREA MATERIALELOR LEMNOASE PRIN PRESARE ÃŽN BRICHETE
- Nicolae CRECAN, Petru UNGUR, Mircea Dinu FODOR, vasile BOGDAN, Dan CRĂCIUN, Carmen IANCU
- DOI: 10.15660/AUOFMTE.2005.138
- COMPUTER-ASSISTED DESIGNING OF A CYLINDRICAL GEAR
- Niculae GRIGORE, Ion FLOREA Bogdan Cristian COJOCARU
- DOI: 10.15660/AUOFMTE.2005.139
- STEERING BOX OF TYPE BOLT - GEARED NUT - SEGMENT GEAR WITH VARIABLE TRANSMISSION RATIO
- Petre ALEXANDRU, Dorin DIACONESCU
- DOI: 10.15660/AUOFMTE.2005.140
- THEORETICAL AND PRACTICAL CONSIDERATIONS CONCERNING THE ARMCO TREATMENT USED TO OBTAIN THE POLAR PIECES FOR THE POWER COAXIAL MAGNETRON
- Petru UNGUR, Mircea GORDAN, Mircea FODOR, Nicolae CRECAN Dan CRĂCIUN, Dumitru UNGUR
- DOI: 10.15660/AUOFMTE.2005.141
- IDENTIFICATION OF THE APROPRIATE PNEUMATIC EJECTION SYSTEM TYPE DESTINED TO THIN WALL INJECTED PARTS WITH LINEAR PROFILE
- Simion HARAGÃ‚Ş , Lucian TUDOSE , Dumitru POP
- DOI: 10.15660/AUOFMTE.2005.142
- COOLING SYSTEMS FOR INJECTION MOLDS
- Simion HARAGÂS, Lucian TUDOSE
- DOI: 10.15660/AUOFMTE.2005.143
- STUDY TO DETERMINATE THE BEST PARAMETERES OF AN INJECTION MOULDING MACHINE USING INJECTION SIMULATION PROCESS
- Sorin ILIE; Horia UNGUR; Ioan MIHAILA
- DOI: 10.15660/AUOFMTE.2005.144
- EXPERIMENTAL RESOURCES ON THE INSULATORS COMPOSITES TO DEGREES THE VALUE OF THE THERMICAL CONTRACTION AT LOW TEMPERATURES
- Titus DELIMAN
- DOI: 10.15660/AUOFMTE.2005.145
- FINITE ELEMENT ANALYSIS OF THE ELASTO-PLASTIC DEFORMATIONS DURING CHIP REMOVING PROCESSING OF THE ELECTROLYTIC COPPER AND GRAPHITE ELECTRODES, USED FOR ELECTRICAL EROSION PROCESSING
- Traian BUIDOŞ
- tbuidos@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.146
- OPTIMISED TECHNOLOGICAL TEMPLATE FOR COMPLEX SURFACES MANUFACTURING ON 3 AXES CNC MACHINES
- Valentin RADA*, Ioan MIHAILA**, Ioan PANTEA**
- DOI: 10.15660/AUOFMTE.2005.147
- DEVELOPING OF PARAMETRIC APPLICATIONS FOR WORKPIECES CENTERING ON MACHINE TOOLS BY USING TOUCH PROBES
- Valentin RADA*, Ioan MIHAILA**, Ioan PANTEA**
- DOI: 10.15660/AUOFMTE.2005.148
- MOLD TOOLING VIA RAPID PROTOTYPING
- Zoltan-Gabor
- bakihari@yahoo.com
- DOI: 10.15660/AUOFMTE.2005.149
- PROBLEMS APPEARING IN THE OPTIMUM CONDITIONS DEVELOPMENT OF URBAN TRANSPORT ON TRAM RAILS
- Mihaela POPESCU*, Puiu CÂNEPARU*, Damian RADESCU**
- mpopescu@mec.utt.ro, dradescu@zappmobile.ro
- DOI: 10.15660/AUOFMTE.2005.150
- ANALYSE ON DYNAMICS RIGIDITY OF ELASTIC COUPLINGS
- Marius FAZECAS
- mfazecas@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.151
- THE DRIVING OF THE CONTINUOUS - CURRENT ENGINES IN ORDER TO OBTAIN VARIABLE ROTATIONS AT A GIVEN CONSTANT POWER
- Pop Mircea Teodor, Hirte Dorin, Meszaros Csaba
- DOI: 10.15660/AUOFMTE.2005.152
- NUMERICAL SIMULATION OF THE SUPERPLASTIC DEFORMATION
- Gavril Grebenişan1, Sorin Mureşan1
- DOI: 10.15660/AUOFMTE.2005.153
- APROXIMATION OF FORMING LIMITS AND EXPERIMENTAL OBSERVATION ON SUPERPLASTIC DEFORMATION
- Gavril Grebenişan1, Sorin Mureşan1
- DOI: 10.15660/AUOFMTE.2005.154
- INFORMATION SYSTEM FOR SMALL AND MEDIUM ENTERPRISES
- Adrian GUNIŠ, Daniel SOMORA, Štefan VALÈUHA
- adrian.gunis@stuba.sk, daniel.somora@stuba.sk, stefan.valcuha@stuba.sk
- DOI: 10.15660/AUOFMTE.2005.155
- ASPECTS OF HUMAN RESOURCES MANAGEMENT RELEVANT FOR EDUCATIONAL TOURISM FIELD
- Cătălin POPESCU
- cpopescu@mail.upg-ploiesti.ro
- DOI: 10.15660/AUOFMTE.2005.156
- SOME ASPECTS OF KNOWLEDGE MANAGEMENT WITHIN VIRTUAL ORGANISATIONS
- Cătălin POPESCU
- cpopescu@mail.upg-ploiesti.ro
- DOI: 10.15660/AUOFMTE.2005.157
- CONSIDERATII PRIVIND SISTEMUL HOLONIC DE FABRICATIE
- Ciprian CRISTEA, Ioan ABRUDAN
- DOI: 10.15660/AUOFMTE.2005.158
- AN OPTIMAL CONSUMPTION POLICY MODEL FOR ECONOMIC GROWTH
- Codruţa STOICA
- stoicad@rdslink.ro
- DOI: 10.15660/AUOFMTE.2005.159
- APLICATION IN DATES MANAGEMENT, UNIVERSITY PORTAL, SECRETARIAT-STUDENTS-PROFESSORS
- Constantin BUNGĂU, Alexandru PELE, Gavril GREBENIŞAN, Lehel CSOKMAI
- bungau@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.160
- APLICATIONS OF INFORMATIONAL ENERGY AND CORRELATION COEFFICIENT IN HUMAN RESEARCHES DOMAINS
- Cornelia Victoria ANGHEL
- canghel@uem.ro
- DOI: 10.15660/AUOFMTE.2005.161
- SOME ASPECTS OF THE SOCIAL IMPACT OF TAXES
- Cosmin SABĂU
- DOI: 10.15660/AUOFMTE.2005.162
- LABOR MARKET UNDER THE PRESSURE OF OIL SHOCKS
- Daniela Cristina MOMETE
- d_momete@chim.upb.ro
- DOI: 10.15660/AUOFMTE.2005.164
- ORGANIZATIONAL CULTURE, PREMISE FOR ORGANIZATIONAL STRUCTURE
- Dorina ROSCA Oana MIHAILA
- drosca@uoradea.ro, omihaila@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.165
- MARKETING’S ELEMENTS FOR INTEGRATED SYSTEMS FOR AGRO-FOODS PRODUCTION
- Dumitru MNERIE
- dmnerie@mec.utt.ro
- DOI: 10.15660/AUOFMTE.2005.166
- ABOUT INFLUENCES OF ENVIRONMENTAL REGLEMENTATION ON MANUFAQCTURING SYSTEMS IN MECHANICAL ENGINEERING
- Dumitru ŢUCU, Drd.ec. Gabriela STAN, Dr.ec. Vasile ROTĂRESCU
- DOI: 10.15660/AUOFMTE.2005.167
- MANAGEMENT OF QUALITY ASSURANCE SYSTEM AT S.C. AMBASADOR PLUS S.R.L.
- Dumitru ŢUCU, ing.ec. Adriana ŢUCU, Dr.ec. Vasile ROTĂRESCU
- DOI: 10.15660/AUOFMTE.2005.168
- MODEL OF INVENTORY FOR A DISTRIBUTION COMPANY
- Emilia CIUPAN
- ciupi@mail.dntcj.ro
- DOI: 10.15660/AUOFMTE.2005.169
- COMPARATIVE STUDY REGARDING THE MANUFACTURING COSTS OF THE SAMPLE PART
- Gabriela Georgeta NICHITA
- gnichita@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.170
- E-COMMERCE
- Ildiko PASC
- ipasc@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.171
- WEB BUSINESS
- Iulian LUPUT
- luputiulian@marmogranit.ro
- DOI: 10.15660/AUOFMTE.2005.172
- SLOVAK SCIENCE AND EUROPEAN RESEARCH SPACE
- Marián TOLNAY
- marian.tolnay@stuba.sk
- DOI: 10.15660/AUOFMTE.2005.173
- NOTIONS ABOUT AUTHOR RIGHT IN THE ROMANIAN LEGISLATION
- Marius-Antoniu MARINA
- DOI: 10.15660/AUOFMTE.2005.174
- NON-VERBAL COMMUNICATION
- Oana MIHAILA
- omihaila@uoradea.ro
- DOI: 10.15660/AUOFMTE.2005.175
- ROLUL BIBLIOTECILOR IN ORGANIZAREA SISTEMULUI INFORMATIONAL AL UNIVERSITATII
- Rodica Volovici
- rodica.volovici@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2005.176
- THE QUALITY OF THE INVESTMENTS DURING THE PROCESS OF ECONOMIC TRANSITION
- Sorin DIMITRIU, Dragos MARCU, Alina NECSULESCU
- DOI: 10.15660/AUOFMTE.2005.177
- MANAGEMENT OF THE ORGANIZATION CULTURE
- Victor CARP, Doina LOBONT
- DOI: 10.15660/AUOFMTE.2005.178
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License