Volume XVIII (VIII), 2009
MECHANICAL ENGINEERING TECHNOLOGY : CAD/CAM techniques, Flexible integrated systems, Materials, Unconventional technologies, CNC technologies
- USING OF THE DIGITIZING METHOD TO THE VIRTUAL SOLID PERFORMING IN THE CASE OF SHOE LAST INDUSTRY
- ALBU Adina, GANEA Macedon, MORAR Mariana, INDRIE Liliana
- adina_victoria@yahoo.com, calin@rdslink.ro
- DOI: 10.15660/AUOFMTE.2009.1531
- POSIBILITIES OF VIRTUAL SOLID CORECTION IN THE CASE OF SHOE LAST BY USING OF THE ANTROPOMETRICAL PARAMETERS
- ALBU Adina, GANEA Macedon, MORAR Mariana, INDRIE Liliana
- adina_victoria@yahoo.com, calin@rdslink.ro
- DOI: 10.15660/AUOFMTE.2009.1532
- THE PROTOTYPE IN THE DESIGN PRODUCT
- ANGHEL Daniel – Constantin, BELU Nadia
- daniel_anghel@yahoo.com, nadia_belu2001@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1533
- ASPECTS REGARDING THE FINITE ELEMENT ANALYSIS OF THE HERMETIZED HARMONIC DRIVES WITH TRUNCATED CONE SHAPE FLEXIBLE GEAR WHEEL
- ARDELEAN Flavius A.
- aflavius@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1534
- ASPECTS REGARDING THE FINITE ELEMENT ANALYSIS OF THE HERMETIZED HARMONIC DRIVES
- ARDELEAN Flavius A.
- aflavius@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1535
- SOME ASPECTS ABOUT THE KNOWLEDGE OF MECHATRONICS EQUIPMENTS RELIABILITY AND ITS TRANSFER TO INDUSTRIAL ORGANIZATIONS
- BĂBAN Marius, BĂBAN Călin Florin, RADU Ioan Eugen
- mbaban@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1536
- TEMPERATURE EFFECT ON KINETICS OF THE HYDROGEN EVOLUTION REACTION
- Gabriela Elena BADEA, Alina CARABAN, Camelia PORUMB, Georgeta GAVRIS, Oana STANASEL
- gbadea@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1537
- BIOMATERIALS WITH FUNCTIONAL GRADIENT USED FOR THE ENDOBONE PERSONALIZED IMPLANTS
- BAILA Diana
- baila_d@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1538
- BIOCOMPATIBILITY OF IMPLANTS TITAN-HIDROXYAPATHITE
- BAILA Diana
- baila_d@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1539
- SYNTHESIS REGARDING THE PRODUCT CONCEPTUAL DESIGN METHODS AND TOOLS
- BANCIU Felicia, DRAGHICI George, MIHARTESCU Andreea
- {fbanciu, gdraghici, amihartescu}@eng.upt.ro
- DOI: 10.15660/AUOFMTE.2009.1540
- A METHOD OF DETERMINING THE PROCESS FUNCTION TO THE FLUXSHIELDED ARC WELDING FOR THE PENETRATION OF THE WELDING SEAM HP BASED ON THE PROCESSING PARAMETERS
- BANU Ilarion, POPA Nicolae, BÄ‚JAN Adrian
- Ilarion_banu@yahoo.com;npopa49@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1541
- CONTRIBUTIONS ON THE INFLUENCE OF THE PROCESSING PARAMETERS ON THE PENETRATION OF THE WELDING SEAM TO THE OPEN JOINT OF SHEETS BY FLUXSHIELDED ARC WELDING
- BANU Ilarion, POPA Nicolae, BÄ‚JAN Adrian
- Ilarion_banu@yahoo.com; npopa49@yahoo.com.
- DOI: 10.15660/AUOFMTE.2009.1542
- THE FLEXIBILITY IN PRODUCTION SYSTEMS
- BÂRSAN Ioan, POPP Ilie Octavian
- ioan.barsan@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2009.1543
- APPLICATION OF FMEA METHOD IN THE DESIGN
- BELU Nadia, ANGHEL Daniel – Constantin
- nadia_belu2001@yahoo.com, daniel_anghel@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1544
- COMPARATIVE ANALYSIS OF METHODS FOR SOLVING CLOSED QUEUEING NETWORKS
- BLAGA Florin, POP Alin, HULE Voichiţa
- fblaga@uoradea.ro , afpop@uoradea.ro , vhule@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1545
- INTEGRATED CAE DEVELOPMENT OF PRECESSIONAL DRIVES USING AUTODESK INVENTOR PLATFORM
- BOSTAN Ion, DULGHERU Valeriu, SOCHIREANU Anatol
- bostan@adm.utm.md , dulgheru@mail.utm.md , salic@mail.utm.md
- DOI: 10.15660/AUOFMTE.2009.1546
- SUPERFINISHING OF THE ACTIVE PARTS OF THE THERMOPLASTIC MATERIALS INJECTION DIES
- BUIDOÅž Traian
- tbuidos@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1547
- ASSESSMENT OF THE INFLUENCE OF SELENIUM ION OVER MINERAL OIL AUTOOXIDATION USING REFRACTIVE INDEX DETERMINATION IN REAL TIME
- Alina CARABAN, Georgeta GAVRIS, Badea GABRIELA, Oana STANASEL, Vasilica MERCA, Monica TODERAS
- acaraban@uoradea.ro,
- DOI: 10.15660/AUOFMTE.2009.1548
- LABORATORY PROCEEDINGS TO DISPLAY DEEP CRACKS ON CERAMICS INSULATORS USED IN 110 KV HIGH VOLTAGE DISCONNECTING SWITCHES.
- CARP Victor, VERES Mircea
- DOI: 10.15660/AUOFMTE.2009.1549
- PENETRATING LIQUIDES METHOD TO SHOW DANGEROUS CRACKS ON CERAMICS POST INSULATORS STRUCTURE
- CARP Victor, VERES Mircea
- DOI: 10.15660/AUOFMTE.2009.1550
- PRODUCT MAKING PROCESS OF THE PRESSURE WELDING CONTACT ELECTROD USING THE CLADDING BY M.M.A WELDING
- CEORAPIN Constantin-Grigore, IOVANAS Daniela-Maria, IOVANAS Radu, PASCU Alexandru
- DOI: 10.15660/AUOFMTE.2009.1551
- SAVING ENERGY IN THE INJECTION MOULDING PROCESS CHIRA Dan, MIHÄ‚ILÄ‚ Åžtefan
- Universitatea din Oradea
- DOI: 10.15660/AUOFMTE.2009.1552
- EXPERIMENTAL STUDIES ON THE LASER DEPOSITS WITH Al2O3 POWDER ON CYLINDRIC SURFACES
- CIOFU Florin, NIOAŢĂ Alin
- florin.ciofu@utgjiu.ro; nalin@utgjiu.ro
- DOI: 10.15660/AUOFMTE.2009.1553
- SOME REMARKS ON CONTACT MODELS OF FINGERPAD - PART I: STATE OF THE ART
- CIORNEI Florina Carmen, ALACI Stelian, CIORNEI Mariana Cătălina, MUSCĂ Ilie, IRIMESCU Luminiţa
- florina@fim.usv.ro
- DOI: 10.15660/AUOFMTE.2009.1554
- SOME REMARKS ON CONTACT MODELS OF FINGERPAD - PART II: SURFACE STRESSES
- CIORNEI Florina Carmen, ALACI Stelian, IRIMESCU Luminiţa, FRUNZĂ Gheorghe, CERLINCĂ Delia Aurora
- florina@fim.usv.ro
- DOI: 10.15660/AUOFMTE.2009.1555
- COMPUTER AIDED TECHNOLOGICAL DESIGN OF MANUFACTURING PROCESSES USING CNC LATHES
- COFARU Nicolae, BORZA Sorin, ROTARU Ionela
- nicolae.cofaru@ulbsibiu.ro, sorin.borza@ulbsibiu.ro, ionela.rotaru@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2009.1556
- COMPUTER AIDED DESIGN OF SHAFTS USING CONCURRENT ENGINEERING PRINCIPLES
- COFARU Nicolae, BORZA Sorin, ROTARU Ionela
- nicolae.cofaru@ulbsibiu.ro, sorin.borza@ulbsibiu.ro, ionela.rotaru@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2009.1557
- CONTRIBUTIONS TO THE OPTIMIZATION OF THE ASSEMBLY OF WORKING PARAMETERS OF TURNING OF THE ROLLING MATERIAL
- CROITORU Marian
- DOI: 10.15660/AUOFMTE.2009.1558
- RECONSTRUCTION AND FLATTENING OF THE SURFACE SHOE LAST PART 1: METHOD FOR RECONSTRUCTION OF THE SHOE LAST
- DRIÅžCU Mariana
- DOI: 10.15660/AUOFMTE.2009.1559
- RECONSTRUCTION AND FLATTENING OF THE SURFACE SHOE LAST PART 2: METHOD FOR FLATTENING OF THE SHOE LAST SURFACE
- DRIÅžCU Mariana
- DOI: 10.15660/AUOFMTE.2009.1560
- AUTOMATIC HEAD CHANGING FUNCTION AT MACHINING CENTERS
- GANEA Macedon, HORGE Ioan
- DOI: 10.15660/AUOFMTE.2009.1561
- ECONOMIC SOLUTIONS AT THE ROTARY TILTING TABLE UNIT AS 5 AXES MACHINING EXTENSIONS AT TMA-AL 550 MACHINE
- GANEA Macedon, GANEA Olimpiu, BUNGAU Constantin
- DOI: 10.15660/AUOFMTE.2009.1562
- THE TESTING SET AT THE TWO CNC AXES ROTARY-TILTING TABLE MRI 500-2CNC
- GANEA Olimpiu, MIHAILA Ioan, HORGE Ioan, GANEA Macedon
- DOI: 10.15660/AUOFMTE.2009.1563
- THE KINEMATICS OF THE GRINDING PROCESS
- GAVRILESCU Ovidiu, GOMBOS Dan
- DOI: 10.15660/AUOFMTE.2009.1564
- STUDIES UPON REMOVAL OF LEAD CATION FROM WASTEWATER COMING BY SPENT ACID SOLUTION OF ELECTROPLATING WORK
- GAVRIÅž Georgeta, ÅžTEFÄ‚NESCU Mircea, GAVRIÅž Mihaela, STOIA Marcela, CÄ‚RÄ‚BAN Alina
- DOI: 10.15660/AUOFMTE.2009.1565
- STUDIES UPON REMOVAL OF LEAD CATION FROM WASTEWATER COMING BY SPENT ACID SOLUTION OF ELECTROPLATING WORK (II)
- GAVRIÅž Georgeta, ÅžTEFÄ‚NESCU Mircea, STÄ‚NÄ‚ÅžEL Oana, SEBEÅžAN Mioara, GAVRIÅž Mihaela
- georgeta_gavris@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1566
- FORCES IN THE GRINDING PROCESS, ELASTIC DEFORMATIONS OF THE TEETH AND THE METHOD OF DIMINISHING THEM
- GOMBOÅž Dan, GAVRILESCU Ovidiu
- DOI: 10.15660/AUOFMTE.2009.1567
- ANALYZE OF THE OPPORTUNITIES OF THE COATING OF THE ACTIVE ELEMENTS OF THE HIGH PRESSURE DIE CASTING MOLDS
- GRAMA Lucian, PETI Ferencz, POP Liviu Dorin
- lgrama@engineering.upm.ro; petiferencz82@yahoo.com; popliviudorin@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1568
- LAPPING AND SUPERFINISHING EFFECTS
- GRAMA Lucian, GABOR Marius, POP Cosmin
- decanat_fei@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1569
- OPTIMIZATION OF THE PLASTICIZING UNIT CONSTRUCTION
- GRAMA Lucian, VASILACHE Virgilius
- DOI: 10.15660/AUOFMTE.2009.1570
- ANALYTICAL AND PHYSICAL MODELS APROACH, IN A DEFORMATION PROCESS
- GREBENIÅžAN Gavril, ROMOCEA Sanda
- grebe@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1571
- EXPERIMENTAL DATA PROCESSING, BY GRAPHICAL USER INTERFACE CURVE FITTING TOOL
- GREBENIÅžAN Gavril, ROMOCEA Sanda
- grebe@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1572
- INFLUENCE OF AIR RESISTANCE ON EJECTION FROM MOLD OF THIN-WALLS INJECTED PARTS
- HARAGÂŞ Simion, TUDOSE Lucian, URSU-FISCHER Nicolae
- DOI: 10.15660/AUOFMTE.2009.1573
- OPTIMIZATION OF THE SOLE-UPPER BONDING TECHNOLOGICAL PARAMETERS IN THE FOOTWEAR INDUSTRY
- HARNAGEA Florentina
- harnagea@tex.tuiasi.ro
- DOI: 10.15660/AUOFMTE.2009.1574
- THE REINFORCEMENT OF THE FOOTWEAR UPPERS WITH SELF AND THERMO ADHESIVE FABRICS
- HARNAGEA Florentina, SECAN Cristina
- harnagea@tex.tuiasi.ro, cris_secan@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1575
- DFMA ANALYSIS TO ESTIMATE MANUFACTURING COSTS
- HORÃK Péter, TIMÃR Imre, HORVÃTH Pál
- horak.peter@gszi.bme.hu, timari@almos.vein.hu, horvathp@almos.vein.hu,
- DOI: 10.15660/AUOFMTE.2009.1576
- THE TESTING SET AT THE TWO CNC AXES TILTING-SWIVELING MILLING HEAD HD 320-2CNC
- HORGE Ioan, MIHAILA Ioan, GANEA Olimpiu , GANEA Macedon
- DOI: 10.15660/AUOFMTE.2009.1577
- CAD MODELING COMPLEX STRUCTURES FOR FEA ANALYSIS
- IANCU Cătălin
- DOI: 10.15660/AUOFMTE.2009.1578
- FEA ANALYSIS OF MECHANICAL PRESS BED
- IANCU Cătălin
- DOI: 10.15660/AUOFMTE.2009.1579
- INFLUENCE OF TiO2 SCALING ON CORROSION RESISTANCE OF TITANIUM IMPLANTS
- IOANOVICI Teodora, MARGINEAN Gabriela, BERETEU Liviu, TOTH-TASCAU Mirela
- teodora.ioanovici@mec.upt.ro, gabriela.marginean@fh-gelsenkirchen.de, liviu.bereteu@mec.upt.ro, mirela@cmpicsu.upt.ro
- DOI: 10.15660/AUOFMTE.2009.1580
- SOME CONTRIBUTIONS IN THE DESIGNING OF THE INJECTION SYSTEMS OF THE MOULDS CAVITIES
- IONESCU LUCA Cornelia, CHIRILÃ Elena
- cionescu@tex.tuiasi.ro, cornelialuca@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1581
- MANAGEMENT CONTRIBUTION OF THE MOULDS PROGRAMMING MADE ON INJECTION EQUIPMENTS
- IONESCU LUCA Cornelia, CHIRILÃ Elena
- cionescu@tex.tuiasi.ro, cornelialuca@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1582
- SINTERED COPPER-GRAPHITE POWDER COMPACTS FOR INDUSTRIAL APPLICATIONS
- IONICI Cristina Felicia
- cfelix1967@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1583
- KERF GEOMETRY BY ABRASIVE WATER JET CUTTING
- JANKOVIĆ Predrag, RADOVANOVIĆ Miroslav
- jape@masfak.ni.ac.yu, mirado@masfak.ni.ac.yu
- DOI: 10.15660/AUOFMTE.2009.1584
- COMMAND OF SPEED SERVOBUILDERS USED IN MACHINE-TOOLS ACTUATION SYSTEMS
- KÖLES Ioan Emeric, MORTOIU Doina, HEGHEDUŞ-MÂNDRU Gabriel, BIRON Ramona
- koles54@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1585
- COMMAND OF SLOW SERVOBUILDERS USED IN MACHINE-TOOLS ACTUATION SYSTEMS
- KÖLES Ioan Emeric, MORTOIU Doina, HEGHEDUŞ-MÂNDRU Gabriel, BIRON Ramona
- koles54@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1586
- MECHANIZED WELDING OF HEAT EXCHANGER BELTS
- LUCACIU Ioan, BURCA Mircea, GLITA Gheorghe, SIPOS Arnold
- luckylucaciu@gmail.com , m.burca@upt.ro , g.glita@upt.ro
- DOI: 10.15660/AUOFMTE.2009.1587
- MIG-MAG ORBITAL WELDING OF PIPES IN TUBULAR PLATE
- LUCACIU Ioan, BURCÄ‚ Mircea, GLIÅ¢A Sebastian
- DOI: 10.15660/AUOFMTE.2009.1588
- THE STUDY OF THE STRUCTURES OF THE GREY CAST IRONS OBTAINED AFTER SUPERFICIAL HARDENING AND ITS INFLUENCE ON MECHANICAL PROPERTIES
- MADA Maria, MIHÄ‚ILÄ‚ Åžtefan, ROTARU Ileana
- DOI: 10.15660/AUOFMTE.2009.1589
- EMISSION FACTORS DURING THE GALVANIZING PROCESS
- MAGDA A., POPESCU M., RADUTA A., NICOARA M., VOICU A.
- DOI: 10.15660/AUOFMTE.2009.1590
- THE INFLUENCE OF THE INJECTION MOULDS TEMPERATURE OVER THE MANUFACTURING PRECISION OF THE POLIMERS WIDELY USED IN PRACTICE
- MIHÄ‚ILÄ‚ Åžtefan, CHIRA Dan, ANIS Luciana, GROZA Mihai1
- mihailasna@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1591
- STUDY CONCERNING THE FORCES CUTTING TO THE REMAKING THROUGH TURN IN LONGITUDINAL OF THE POLYAMIDE PA 66 MoS2
- Marin MOŢOI – CRISTESCU
- marian_motoi@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1592
- THE ANALYSIS OF THE INFLUENCE OF THE CUTTING REGIME PARAMETERS THROUGH THE SIGNAL-NOISE RATIO BY THE LATHING PROCESS OF THE POLYAMIDE PA 66 MoS2
- Marin MOŢOI – CRISTESCU
- marian_motoi@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1593
- DERIVATION THERMAL ANALYSIS AT METALIC MATERIALS
- MUDURA Pavel
- pmudura@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1594
- BIMETAL HIGH-QUALITY ELASTIC BUSHING CONSTRUCTION
- NAGY Alexandru, MIHÄ‚ILÄ‚ Ioan V.
- DOI: 10.15660/AUOFMTE.2009.1595
- THE BRONZE-PLATING TECHNOLOGY OF ACME THREADS FOR MOVING NUTS.
- NAGY Alexandru, MIHAILA Ioan V.
- DOI: 10.15660/AUOFMTE.2009.1596
- STUDIES REGARDIND THE HEAT TREATMENT’S TECHNOLOGIES OF ALUMINIUM AND ALUMINIUM ALLOYS
- NECSULESCU Daniela Alina, NECSULESCU Cezar Corneliu, MARCU Dragos
- alinanecsulescu@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1597
- ANALYSIS OF CHARACTERISTICS TECHNIQUE IN 3D CAD MODELING OF RAPID PROTOTYPING WITH SLS
- NICHITA Gabriela Georgeta
- gnichita@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1598
- MECHANICAL FACTORS INFLUENCING THE COMPLEX EROSION PROCESSING BY INTRODUCING THE ELECTROLYTE THROUGH THE TRANSFER OBJECT
- NIOAŢĂ Alin, DOBROTĂ Dan, CIOFU Florin
- nalin@utgjiu.ro
- DOI: 10.15660/AUOFMTE.2009.1599
- EXPERIMENTAL PATTERN OF COMPLEX EROSION PROCESSING BY INTRODUCING THE ELECTROLYTE THROUGH THE TRANSFER OBJECT
- NIOAŢĂ Alin, CIOFU Florin, PASĂRE Minodora
- nalin@utgjiu.ro
- DOI: 10.15660/AUOFMTE.2009.1600
- TYPICAL CHARACTERISTICS AND FUNCTIONS AT MODULAR FIXTURE SYSTEM USABLE AT PALETIZABLE HORIZONTAL MILLING CENTER AND FLEXIBLE CELLS
- PANCU Rares, GANEA Macedon, BUNGAU Constantin
- DOI: 10.15660/AUOFMTE.2009.1601
- AUTOMATIC WORK PIECE CHANCHING FUNCTION (AWPC) BY ROBOT ON MODULAR FIXTURE SYSTEM USABLE AT THE HORIZONTAL MILLING CENTER TMA-AL 550
- PANCU Rares, GANEA Macedon, BUNGAU Constantin, Groza Mihai
- DOI: 10.15660/AUOFMTE.2009.1602
- YIELD VARIATION COMPOSITE CATHODE MATERIAL FOR NI-P
- Minodora Maria PASĂRE, Nicoleta - Maria MIHUŢ, Alin NIOAŢĂ, Cătălina IANĂŞI
- minodora_pasare@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1603
- INDUSTRIAL TECHNOLOGY OF LASER CLADDING AND WELDING FOR AUTOMOTIVE APPLICATIONS
- PASCU Alexandru, IOVANAS Radu, CEORAPIN Constantin-Grigore
- DOI: 10.15660/AUOFMTE.2009.1604
- RESEARCH ABOUT ROUGHNESS AFTER TURNING WITH SMALL CUTTING FEEDS
- PASCU Cristina Ileana, POPESCU Iulian, STANIMIR Alexandru
- i_pascu@yahoo.com, mediu06@yahoo.com, alexstanimir@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1605
- NEWS TRENDS IN SYNTHESIS OF NANOSTRUCTURED OXIDE POWDERS
- PLAIASU Adriana Gabriela
- plaiasugabriela@yahoo.fr
- DOI: 10.15660/AUOFMTE.2009.1606
- SYNTHESIS OF PALLET SHAPED ZNO NANOPARTICLES VIA AN AQUEOUS ROUTE
- PLAIASU Adriana Gabriela
- plaiasugabriela@yahoo.fr
- DOI: 10.15660/AUOFMTE.2009.1607
- MANUFACTURING METHODS FOR VIBRO –ROLLING OF THE EXTERIOR SURFACES
- POLOJINTEF CORBU Nicolae, MITRAN Tudor, PATER Sorin, BRATU Ion
- corbunicolae@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1608
- E-LEARNING APLICATION FOR THE PERFORMANCE ANALYSIS IN QUEUEING NETWORKS
- POP Alin, BLAGA Florin
- afpop@uoradea.ro , fblaga@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1609
- MEMS AN ALTERNATIVE FOR THE FUTURE
- POP P. Adrian, BEJINARU MIHOC Gheorghe
- adippop@yahoo.com, bejinaru@unitbv.ro
- DOI: 10.15660/AUOFMTE.2009.1610
- LASER AN APPLICATION FOR MICRO-NANOFABRICATION
- POP P. Adrian, BEJINARU MIHOC Gheorghe
- adippop@yahoo.com, bejinaru@unitbv.ro
- DOI: 10.15660/AUOFMTE.2009.1611
- AESTHETIC SURFACES BASED ON ARCHIMEDES CIRCLES AND SPIRALS GENERATED BY VIBRO-ROLLING
- POPESCU Iulian, PASCU Cristina Ileana
- mediu06@yahoo.com, i_pascu@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1612
- WELDING GALVANIZED STEEL – SAFELY – CMT WELDING CASE STUDY
- POPESCU M., MAGDA A., MOCUTA G.E., RADUTA A., NICOARA M., LOCOVEI C.
- DOI: 10.15660/AUOFMTE.2009.1613
- GENERAL PROBLEMS WHEN JOINING SHAPE MEMORY ALLOYS
- POPESCU M., MARTA C., MITELEA I., MAGDA A., DOROHOI C.
- Material Testing – ISIM Timişoara
- DOI: 10.15660/AUOFMTE.2009.1614
- MEASUREMENT OF CUTTING FORCES AT HIGH SPEED INTERNAL GRINDING
- Daniel Popescu, Mirela Cherciu
- daniel.popescu1119@yahoo.com, mirela_cherciu2005@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1615
- CONSIDERATIONS REGARDING THE MONITORING SYSTEM FOR PREVENTIVE MAINTENANCE.
- POPP Ilie Octavian, BÂRSAN Ioan
- ilie.popp@ulbsibiu.ro
- DOI: 10.15660/AUOFMTE.2009.1616
- CONTRIBUTIONS TO OPTIMIZING THE TECHNOLOGICAL PROCESSING PROCEDURE OF THE BENCH DRAUGHT BAR FOR THE ROLLING MATERIAL
- PUTZ Viorel, SÃŽRBU NicuÅŸor Alin
- vputz@eng.upt.ro, asirbu@isim.ro
- DOI: 10.15660/AUOFMTE.2009.1617
- INVESTIGATING AND PROTECTING BRONZE ARTIFACTS
- ROTARU Ileana, MS, MADA Maria, PhD
- DOI: 10.15660/AUOFMTE.2009.1618
- DETERMINING THE CONSUMED POWER WHEN DEBITING WITH THE CIRCULAR SAW FCA - 810 M
- SBÂRCIOG Ioan
- DOI: 10.15660/AUOFMTE.2009.1619
- ADAPTIVE COMMAND SOLUTION FOR THE CIRCULAR SAW FCA- 810 M
- SBÂRCIOG Ioan
- DOI: 10.15660/AUOFMTE.2009.1620
- INFLUENCE OF MICROWAVES ON CHEMICAL OXIDATION PROCESSES
- SEBEÅžAN Radu, SEBEÅžAN Mioara, CÄ‚RÄ‚BAN Alina, SILAGHI Marius
- rsebesan@uoradea.ro, msebesan@uoradea.ro.
- DOI: 10.15660/AUOFMTE.2009.1621
- ESTIMATED MINERAL DEPOSITS OF INSTALLATIONS WITH GEOTHERMAL WATER TO PREVENT CORROSION
- SEBEÅžAN Radu, SEBEÅžAN Mioara, STÄ‚NÄ‚ÅžEL Oana
- rsebesan@uoradea.ro, msebesan@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1622
- THE INFLUENCE OF TYPE OF USED KNIVES ON FLANKS CURVATURE OF CYLINDRICAL GEAR WITH CYCLOIDAL TEETH
- STÇNÇÅžEL Iulian, GHIONEA Adrian, BLAGA Florin Sandu,
- DOI: 10.15660/AUOFMTE.2009.1623
- ROUGHNESS COMPARATIVE ANALYSIS OF CUTTING TOOLS WORKING SURFACES USING THE DIGITAL PORTABLE ROUGHNESS TESTER
- STÄ‚NCIOIU Alin, GÃŽRNICEANU Gheorghe, POPESCU Gheorghe
- alin@utgjiu.ro, girniceanu@utgjiu.ro, gepo@utgjiu.ro
- DOI: 10.15660/AUOFMTE.2009.1624
- ON THE BEST CONDITIONS FOR LARGE SCALE INTRODUCTION OF PUNCHERS AND MODULATED DIES IN THE MANUFACTURING COURSE
- STÄ‚NCIOIU Alin, GÃŽRNICEANU Gheorghe, POPESCU Gheorghe
- alin@utgjiu.ro, girniceanu@utgjiu.ro, gepo@utgjiu.ro
- DOI: 10.15660/AUOFMTE.2009.1625
- EXPERIMENTAL STUDY ON RUL1V BEARING STEEL HARDNESS, RAKE ANGLE AND TOOL MATERIAL INFLUENCE ON CUTTING FORCES
- STANIMIR Alexandru, COPILUÅž Petre Cristian, ZAMFIRACHE Marius
- alexstanimir@yahoo.com,
- DOI: 10.15660/AUOFMTE.2009.1626
- INVESTIGATION OF WORK CONDITIONS INFLUENCE ON WHITE LAYER FORMATION IN HARD MACHINING OF RUL1V BEARING STEEL
- STANIMIR Alexandru, PASCU Ileana-Cristina, BENGA Gabriel
- alexstanimir@yahoo.com, i_pascu@yahoo.com, gabrielbenga@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1627
- HARMONIC VERSUS EVASIVE MOVEMENTS IN CERVICAL SPINE MOBILITY
- STOIA Dan Ioan, TOTH-TAÅžCÄ‚U Mirela
- ionut@cmpicsu.upt.ro, mirela@cmpicsu.upt.ro
- DOI: 10.15660/AUOFMTE.2009.1628
- 3D MODELING OF A LUMBAR SPINE UNIT
- STOIA Dan Ioan, SÄ‚FTESCU-JESCU Cristian, BERETEU Liviu
- ionut@cmpicsu.upt.ro, saftescucristian@gmail.com, liviu.bereteu@mec.upt.ro
- DOI: 10.15660/AUOFMTE.2009.1629
- APPLYING ULTRASONICS VIBRATIONS TO THE MOULDING OF PODER
- TOLNAY Marián, JERZ VladimÃr, BACHRATà Michal, STAÅ Ondrej
- marian.tolnay@stuba.sk
- DOI: 10.15660/AUOFMTE.2009.1630
- RESEARCH AND IMPLEMENTATION OF TECHNOLOGIES AND EQUIPMENTS FOR ACHIEVING FUEL PRODUCTS LIKE PELLETS
- TOPOLOGEANU Marian, VELICU Stefan, TARCA Radu Catalin, VESSELENYI Tiberiu
- topologeanu@yahoo.com; velstefan@hotmail.com, rctarca@uoradea.ro, tvesselenyi@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1631
- NEW CULTURAL EVOLUTIONARY ALGORITHM USED IN OPTIMAL DESIGN OF MACHINE ELEMENTS
- TUDOSE Lucian, URSACHE Constantin, JUCAN Daniela
- DOI: 10.15660/AUOFMTE.2009.1632
- UNSING OF MICROWAVES IN FABRICATION PROCESS OF MODELING GYPSUM PLASTER
- UNGUR Patricia A., MIHAILA Ioan
- patrymode2005@yahoo.com
- DOI: 10.15660/AUOFMTE.2009.1633
- EXPERIMENTAL RESEARCH CONCERNING THE EFFICIENCY OF THE MICROWAVE INSTALLATION
- URSU Mircea-Petru, BUIDOÅž Traian
- mpursu@uoradea.ro, tbuidos@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1634
- RESEARCH ABOUT THE DESIGN AND REALIZATION OF AN ELECTRONIC DEVICE FOR MICROWAVE INSTALLATION COMMAND AND CONTROL
- URSU Mircea-Petru
- mpursu@uoradea.ro
- DOI: 10.15660/AUOFMTE.2009.1635
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License