• Home
• Editorial Board
• Guide for Authors
• Peer Review
• Editorial Policies
• Aims and Scope
• Conflict of Interest
• Ethical Issues
• Indexing Information
• Submitting Paper
• Contact Us
• Archive
• User Registration
• Join Us
• Open Access
• Settlement of Disputes

Volume XXI (XI), 2012/1

MECHANICS : Mechanics, Strength of materials, Mechanical vibrations, Numerical Methods, Applied Mathematics, Machines and equipment

• DYNAMIC ANALYSIS OF THE GUIDING AND SUSPENSION SYSTEM OF THE VEHICLES’ REAR AXLE IN MULTI-BODY SYSTEMS CONCEPT
  • Alexandru Cătălin
  • DOI: 10.15660/AUOFMTE.2012-1.2680

• MONITORING COLD WATER METER USING A COMBINED METHOD CABLE AND RADIO WAVES
  • Botiş Aurel Cristian, Mihăilă Ioan
  • DOI: 10.15660/AUOFMTE.2012-1.2681

• IDENTIFICATION OF THE VIBRATION EIGEN MODES FOR ELASTIC ENGINE MOUNTINGS
  • Buzea Daniel, Iacob Adrian, Soimaru Cristian
  • DOI: 10.15660/AUOFMTE.2012-1.2682

• A HUMAN LOWER LIMB KINEMATIC ANALYSIS
  • Copilusi Cristian
  • DOI: 10.15660/AUOFMTE.2012-1.2683

• THE ANALYSIS OF THE INFLUENCE OF DISTRIBUTED MASS OF THE SPRINGS ON THE RESONANCE OF THE ELASTICAL MECHANICAL SYSTEMS
  • Dragan Nicusor
  • DOI: 10.15660/AUOFMTE.2012-1.2684

• FINENESS PARAMETERS OF CROP GRINDS STUDY ON HAMMER MILL AND GRINDING FORAGE AND ENERGY CROPS
  • Fogarasi Lajos, Bense László, Fülöp István
  • DOI: 10.15660/AUOFMTE.2012-1.2685

• DESIGNING AND DEVELOPING A SUPERFINISHING DEVICE WITH VARIABLE AMPLITUDE AND FREQUENCY FOR 18CrMo4 PARTS
  • Gabor Marius
  • DOI: 10.15660/AUOFMTE.2012-1.2686

• ROTATION CORRECTION IN INTERFERENCE FITS CALCULUS
  • Gruescu Corina, Bodea Renata
  • DOI: 10.15660/AUOFMTE.2012-1.2687

• EXPERIMENTAL RESEARCHES REGARDING THE USE OF THE COMPOSITE MATERIAL IN THE STEEL BEAMS REINFORCEMENT
  • Ianăşi Aurora-Cătălina
  • DOI: 10.15660/AUOFMTE.2012-1.2688

• THE FINITE ELEMENT MODELING OF THE BUSH CHAINS BOLT-BUSH CONTACTS
  • Lateş Mihai-Tiberiu
  • DOI: 10.15660/AUOFMTE.2012-1.2689

• MATHEMATICAL SIMULATION IN CENTER OF GRAVITY POSITION FOR A BIPED ROBOT
  • Mate Csaba Zoltan, Faluvegi Erzsebet, Cristea Luciana
  • DOI: 10.15660/AUOFMTE.2012-1.2690

• WAYS TO INCREASE THE CONTACT RATIO FOR SPUR GEARS
  • Moldovean Gheorghe, Gavrilă C. Cătălin, Huidan Livia
  • DOI: 10.15660/AUOFMTE.2012-1.2691

• STUDY OF MECHANICAL BEHAVIOR OF REPROCESSING HIGH IMPACT POLYSTYRENE, RECOVERY WITH SEBS
  • Peydró M.A. , Juárez D., Crespo J.E., Parres F.
  • DOI: 10.15660/AUOFMTE.2012-1.2692

• ELEMENTS REGARDING THE ANALYSIS OF SILICONE RUBBER CHARACTERISTICS OBTAINED FROM USED TILE OF ELECTRICAL COMPOSITE INSULATORS
  • Popescu Daniel
  • DOI: 10.15660/AUOFMTE.2012-1.2693

• CIRCULAR CONTACT OF NONLINEAR ELASTIC BODIES SUBJECTED TO IMPORTANT STRAINS
  • Românu Ionuţ Cristian, Muscă Ilie
  • DOI: 10.15660/AUOFMTE.2012-1.2694

• RECENT ADVANCES IN STRUCTURAL OPTIMIZATION
  • Sanchez-Caballero S., Selles M.A., Pla-Ferrando R., Martinez Sanz A.V., Peydro M.A.
  • DOI: 10.15660/AUOFMTE.2012-1.2695

• EXPERIMENTAL DETERMINATIONS OF THE RESPIRATORY THERMAL LOSSES DURING THE DIVING
  • Stanciu Tamara
  • DOI: 10.15660/AUOFMTE.2012-1.2696

• CONSTRUCTION DESIGN AND ANALYSIS WITH COMPUTER AIDED ENGINEERING TOOLS.
  • Szabó István, Kátai László
  • DOI: 10.15660/AUOFMTE.2012-1.2697

• THEORETICAL CONSIDERATIONS UPON PLASTIC SHEAR REGIONS IN A LUBRICANT FILM PLACED BETWEEN AN ASPERITY AND A PLANE
  • Vasilache Fomin Michaela
  • DOI: 10.15660/AUOFMTE.2012-1.2698

• FRICTION TEST BALL ON FLAT DURING RUNNING-IN PERIOD ON UMT TRIBOMETER
  • Velicu Radu, Lateş Mihai, Papuc Radu
  • DOI: 10.15660/AUOFMTE.2012-1.2699

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License